Irrigation / Sprinkler
Read Scaperweb blog articles about irrigation / sprinkler — tips, guides, and marketplace updates for homeowners and service providers.
- How to Replace a Single Clogged Drip Emitter Without Digging Up the Whole Lateral Line
One clogged emitter can brown a shrub while the rest of the zone looks fine. Learn how to find, flush, and swap a single dripper so you fix the plant without rebuilding the bed.
- How to Protect Above-Ground Backflow Preventers Before the First Hard Freeze
A backflow device left wet and exposed can crack on the first hard freeze and dump water at the meter. Learn a practical protect-and-drain sequence before freezing nights arrive.
- How to Separate Drip Irrigation for Beds From Lawn Spray Zones on One Controller
Beds and turf rarely want the same run time. Learn how to split drip and spray onto sensible zones so you stop drowning shrubs to keep grass green.
- How to Fix Misty Sprinkler Spray Caused by High Water Pressure
When heads mist into the air instead of throwing clean droplets, wind carries your water onto sidewalks and the lawn stays dry. Learn how to recognize high pressure and correct it without random timer tweaks.
- How to Winterize an In-Ground Sprinkler System Before Freeze Risk
A rushed blowout or a forgotten backflow can crack pipes and heads when nights drop. Learn a careful shutdown sequence so your irrigation survives winter without spring geyser surprises.
- How to Program a Rain Delay Without Forgetting to Resume Your Normal Schedule
Rain delays save water only if they end on purpose. Learn how to set, track, and clear delays so one wet week does not leave the lawn dry—or stuck off for a month.
- How to Spot a Stuck Irrigation Valve That Keeps Watering After the Timer Ends
When one zone will not shut off, the timer may be fine and a valve may be stuck open. Learn the clues, a safe shutdown order, and what to check before you dig.
- How to Restart Your Sprinkler System in Spring Without Damaging Heads
A careful spring startup finds leaks, stuck valves, and cracked heads before you flood the lawn. Follow a zone-by-zone sequence instead of blasting full pressure at once.
- How to Map Your Sprinkler Zones So You Can Fix Dry Spots Without Guessing
A dry patch is not always a broken head. Learn how to run one zone at a time, mark what it covers, and match the brown spot to a valve instead of raising every run time.